Categories
Windows 10

How to Find Saved Wi-Fi Passwords in Windows 10

Windows OS has been developed by the Microsoft and its in the arena for more than 3 decades now. Since 80s Windows has come up in many versions and all of them had a great emphasis on security. Windows 10 is the latest operating system from Microsoft and the developers has put lots of efforts in developing this operating system. Windows 10 has enhanced security and stability of the operating system. In this tutorial you will learn how to find saved Wi-Fi passwords on Windows 10. When ever you enter the password for joining the wireless network, Windows will obscure it by default. A series of astericks keep inquistiving eyes from peering in on the contents of the field containing your password in order to keep your network safe. Once the passwords are saved they will be obscured.You can also learn about Drawing Tap Symbol in AutoCAD.

In order to find the saved Wi-Fi passwords on Windows 10 you need to follow these simple steps.

  • 1st of all you need to right click the Wi-Fi icon and Open Network and Sharing Center from your Windows System Tray.
  • Click on Connections that is your Wi-Fi network name in order to open the Wi-Fi Status Window.
  • In the next step you need to click Wireless Properties.
  • Now you are required to switch to the Security tab.
  • Now you are required to check the box that says Show Characters under Network security key.

With these simple steps you can easily find the saved Wi-Fi passwords on your Windows 10.

Categories
AutoCAD

How to Draw a Tap Symbol in AutoCAD

AutoCAD is undoubtedly the most widely used CAD tool in the engineering and architectural circles. AutoCAD has simplified the process of creating engineering drawings and it lets you save your precious time hence enhancing the productivity to a great degree. In this tutorial you will learn how to draw a tap symbol in AutoCAD. You can also learn about How to Add Chamfer in AutoCAD.

For drawin a tap symbol in AutoCAD you need to follow these simple steps

  • 1st of all you need to open a new drawing and for that you need to click on New.
  • You need to make sure that ORTHO mode is ON. (It will be ON when it glow in blue, OFF in grey.)
  • Type z[spacebar], type e [spacebar] and it will zoom extents you drawing area.
  • Now you need to make sure that Layer 0 has been selected as current layer.
  • Now click on CIRCLE and type 0,0 and press Enter in order to set the center of the circle.
  • Now set the radius of the circle to 0.125 and type 0.125 and press Enter.
  • Now click on OFFSET and set the offset distance to 0.025 and click at the circle as offset object.
  • Now click on the insode of the circle in order to define the offset side.
  • Press Esc few times in order to end OFFSET command.
  • Now click on the outer circle edge and then change the layer to HIDDEN layer and press Esc few times.
  • Now change the current layer to CENTER LINE layer.
  • From the ribbon tool click Annotate>DImensions>Center mark.
  • Now click on outer edge of any circle for marking its center.
  • Now click Home>Scale.
  • Select the center mark cross.
  • Now press Enter in order to confirm selection.
  • Click on midpoint of the cross as scale base point.
  • Now you need to set scale factor to 4 and for that you need to type 4 and press Enter.
  • With this you will finish creating a tap.
Categories
AutoCAD

How to Add a Chamfer in AutoCAD

AutoCAD is a must have tool for the engineers as well as architect for creating engineering drawings and architectural designs. The productivuity of industries have enhanced greatly after the advent of AutoCAD as it has simplified the process of creating engineering drawings. IN this lecture you will learn how to add chamfer in your drawing. You can also learn How to Create a Slot in AutoCAD.

For adding a chamfer into your drawing you ned to follow these simple steps.

  • 1st of all you need to open a new drawing and for that you need to click New.
  • You need to make sure that ORTHO mode is ON. It will be ON when it glow in blue.
  • Now type z [spacebar], e [spacebar]. This will zoom extend your drawing area.
  • Now is the time to click on RECTANGLE tool for activating the Rectangle command.
  • Now specify the 1st corner of the rectangle at 0,0 and for that you need to type 0,0 and press Enter.
  • Move the cursor to the right side and specify the other corner point at 10,6 and for that you need type 10,6 and then press Enter.
  • Now you need to click on CHAMFER from the ribbon tools.
  • Once the CHAMFER command is executed you need to specify the distance 1 as well as distance 2 of the chamfer.
  • For this tutorials lets have a chamfer distance of 2 so you need to specify chanfer distance to 2 or 2@45deg chamfer. Type D and the enter dist1=2 and dist2=2.
  • Now click on the 1st edge of the chamfer.
  • Click on 2nd edge of the chamfer.
  • Press Enter for confirming the chamfer.